Products
- View as
Low Carbon Steel Wire Cut Shot
Shandong Haishan Industrial Technology supplies Low Carbon Steel Wire Cut Shot made from C≤0.25% steel wire, with HRC 30–38 hardness and high toughness. It resists cracking under impact and is suited for scratch-free deburring and matte finishing of aluminum alloys, galvanized sheets, and thin-wall parts. Buyers can source this abrasive for non-destructive cleaning in bulk quantities.
Steel Wire Cut Shot
Shandong Haishan Industrial Technology manufactures Steel Wire Cut Shot by cutting steel wire into short cylinders, preserving the original grain structure for sharp cutting edges and toughness. Density is 7.8 g/cm³, with low dust generation and good recycling capability. It is used for heavy rust removal, weld slag cleaning, and shot peening of load-bearing parts. Buyers can procure sizes from 0.8–3.0 mm; samples and test reports are available.
High Carbon Steel Wire Cut Shot
Shandong Haishan Industrial Technology manufactures High Carbon Steel Wire Cut Shot with carbon content 0.70–0.95% and hardness HRC 48–55. The tempered martensite structure provides low consumption and long service life in automated blasting lines for rust removal, descaling, and shot peening. Density is 7.8 g/cm³. Buyers can request batch test reports and technical evaluation before bulk procurement.
Wire Cut Shot 1.5mm
Shandong Haishan Industrial Technology is a manufacturer of Wire Cut Shot 1.5mm, a medium carbon steel abrasive with HRC 42–48 and density 7.8 g/cm³. It is used for heavy-duty rust, mill scale, and welding slag removal on thick-walled steel structures, castings, and forgings. The product offers high impact energy, low dust, and good fracture resistance. Buyers can request samples and test reports for bulk procurement.
Wire Cut Shot 1.2mm
For small and medium workpieces requiring moderate impact force and fine rust removal, Shandong Haishan Industrial Technology supplies Wire Cut Shot 1.2mm. Made from 1.2mm steel wire with a 1:1 length-diameter ratio, this medium-fine abrasive is available in passivated or sharp types. It is suitable for bulk procurement in standardized blasting lines where balanced cleaning efficiency and surface roughness are needed.
Descaling Wire Cut Shot
Bulk buyers sourcing Descaling Wire Cut Shot from Shandong Haishan Industrial Technology get high-carbon, high-hardness steel wire with sharp edges for one-pass thick rust and oxide skin removal, without excess roughness. Works with outdoor sandblasting and large blast machines. Factory direct supply.
